Zeosdbo 6.6 6 Stable

Here we will guide on how to download and install MIUI 9.6.6.0 Global Stable ROM on Mi Max 3 (nitrogen). The update is based on Android 8.1 Oreo system.

Today Xiaomi started rolling the new firmware update based on the MIUI Global release. The update is confirmed to be running on the software version MIUI 9.6.6.0.OEDMIFD. The update is currently rolling for Mi Max 3 (nitrogen). The update fixes the regular bug fixes and improvements. MIUI 9 Global Stable ROM V9.6.6.0.OEDMIFD software update is moving around in a phase-wise manner. You can wait for the update to reach your phone or you can manually install the update via our guide given below.

Here below we have given the complete guide to installing the MIUI 9.6.6.0 Global Stable ROM on Mi Max 3. The update is based on Android 8.1 Oreo. Currently, the update is rolling via OTA and will reach every user running MIUI Global Stable ROM on Mi Max 3. In case if you still not received then you have to wait for a couple of days or weeks to reach the update on your phone. Don’t worry! Like we said, you can download and install the update manually. Before that, let’s try to check if you have any new update. Read and follow the below instructions to check software update on Xiaomi Mi Max 3.

Contents

ZeosDBO versi 6.6.6 stable dapat digunakan di Delphi mulai dari Delphi 5 ke atas dan juga Lazarus, sedangkan ZeosDBO versi 7.0.0 alpha hanya untuk Delphi 2009, 2010 dan 2011. Today we want to officially announce the release of the ZEOS DBO Library 6.6.4 – stable. The download links are the following ones: ZEOSDBO-6.6.4-stable ZEOSDBO-6.6. Buka aplikasi Delphi dan install component ZEOSDBO pada dengan cara klik menu File open Pilih file 'C: ZEOSDBO-6.6.6-stable packages delphi11 ZComponentDesign.dpk' - Open 6.

4 Steps to Install MIUI 9.6.6.0 Global Stable ROM on Mi Max 3

Xiaomi Mi Max 3 Specifications

Xiaomi’s Mi Max 3 has a 6.9 inches FULL HD Display having a resolution of 1080 x 2160 pixels. This makes the pixel density of ~350 ppi density which is quite high. The display is expected to be pretty good. Under the hood, the Mi Max 3 is powered by a Qualcomm SDM636 Snapdragon 636 which is clocked at 1.8 GHz. This coupled with the Adreno 509 GPU makes a perfect combination for an immense performance.

The Mi Max 3 comes in 2 variants, one with 6 GB RAM and 128 GB Internal Storage and another one with 4 GB of RAM and 64 GB of Internal Storage. The Smartphone has a Dual: 12 MP (f/1.9, 1.4μm, dual pixel PDAF) + 5 MP (depth sensor) camera set up at the rear with portrait mode. On the front, the Xiaomi Mi Max 3 has an 8 MP Camera for selfies. There is a 5500 mAh battery powering the device.

How to Check Software Update on Xiaomi Mi Max 3:

On your Xiaomi Mi Max 3, Go to Settings
Tap on About Phone
Now tap on System Update
Wait until you see a screen showing the latest build.

If you have any update, then hit the DOWNLOAD to start downloading. Once the download is done, you can upgrade your Mi Max 3 to MIUI 9.6.6.0. Also, make sure to follow the below important note before upgrading via OTA.

[su_note note_color=”#fbfbbe”]Note: Before proceeding to update via OTA, you must have a proper WiFi connection which is stable enough to download the complete OTA. Also, make sure to charge your phone for at least 60-70% before upgrading your Mi Max 3 to MIUI 9.6.6.0.[/su_note]

Still not received the MIUI 9.6.6.0 Global Stable ROM on Mi Max 3? then we can try the best solution: Manually install the MIUI 9.6.6.0 Global Stable ROM on Mi Max 3.

MIUI 9.6.6.0 Changelog:

Not Known yet

[su_youtube_advanced url=”https://www.youtube.com/watch?v=_7kqpCjdz6s&t=84s” controls=”alt” rel=”no”]

Steps to Install MIUI 9.6.6.0 Global Stable ROM on Mi Max 3

Before following the below guide, make sure to download and move the complete zip file to SD card (Recovery method) and also follow the pre-requisite.

Download MIUI 9.6.6.0 for Mi Max 3 (nitrogen)

MIUI 9.6.6.0 Global Stable ROM for Mi Max 3 (Recovery ROM) – Download
MIUI 9.6.6.0 Global Stable ROM for Mi Max 3 (Fastboot ROM) – Download

Pre-Requisites:

This ROM is supported only for Xiaomi Mi Max 3.
Download and Install the latest Xiaomi USB Driver for Windows and MAC
Download and Install the Xiaomi Mi Flash tool on your PC (Fastboot Method)
Charge your phone to at least 60-70% before upgrading your phone.
Take a complete backup (Recommended)
—–> How to Backup Your Android Phone Without ROOT
—–> Backup Your Android Apps and Data with Titanium Backup
—–> How to Backup Your Data on Android device

GetDroidTips will not be responsible for bricking or damage to your device

Instructions to Install:

To install MIUI 9.6.6.0 on Mi Max 3, we have given two methods, either you can follow the recovery method or you can follow the fastboot method.

Guide to Install MIUI ROM On Xiaomi Device (Recovery / Fastboot)

I hope this guide was helpful to install MIUI 9.6.6.0 Global Stable ROM on Mi Max 3 (nitrogen).

Active2 years, 11 months ago

I'm having problems installing ZEOSLib 6.6.6-stable in BDS C++ Builder 2006.I only have C++Builder installed, no Delphi, but I can see the dcc32.exe file in the bds/4.0/bin/ folder.

When I try to compile the packages with the Delphi compiler from the command line, as suggested in this post, using dcc32.exe zeosdbo.bdsgroup -JPHNE, I receive several error messages (see below) and the compilation stops.

What Does 6 6 6 Mean

I've also tried opening the builder6/zeosdbo.bpg file in the IDE and it updates the project files to version 10 and generates a set of .bdsgroup files, but when trying to build the project files a file not found Zclasses.dcu error message apears.

Zeosdbo 6.6 6 Stables

Can you please provide any further help on this problems?

Messages received when trying to compile the packages with the Delphi command-line compiler:

C:ZEOSDBOpackagesDELPHI10ZeosDbo.bdsgroup(1) Error: E2029 Declaration expected but '<' found

c:ZEOSDBOpackagesDELPHI10ZeosDbo.bdsgroup(1) Error: E2038 Illegal character in input file: '' (#$22)
c:ZEOSDBOpackagesDELPHI10ZeosDbo.bdsgroup(1) Error: E2038 Illegal character in input file: '' (#$22)

c:ZEOSDBOpackagesDELPHI10ZeosDbo.bdsgroup(5) Error: E2038 Illegal character in input file: '' (#$22)

c:ZEOSDBOpackagesDELPHI10ZeosDbo.bdsgroup(6) Error: E2038 Illegal character in input file: '' (#$22)

c:ZEOSDBOpackagesDELPHI10ZeosDbo.bdsgroup(7) Error: E2038 Illegal character in input file: '' (#$22)

c:ZEOSDBOpackagesDELPHI10ZeosDbo.bdsgroup(8) Error: E2038 Illegal character in input file: '' (#$22)

c:ZEOSDBOpackagesDELPHI10ZeosDbo.bdsgroup(12) Error: E2038 Illegal character in input file: '' (#$22)

c:ZEOSDBOpackagesDELPHI10ZeosDbo.bdsgroup(13) Error: E2038 Illegal character in input file: '' (#$22)

Zeosdbo 6.6 6 Stabler

c:ZEOSDBOpackagesDELPHI10ZeosDbo.bdsgroup(14) Error: E2038 Illegal character in input file: '' (#$22)

c:ZEOSDBOpackagesDELPHI10ZeosDbo.bdsgroup(15) Error: E2038 Illegal character in input file: '' (#$22)

c:ZEOSDBOpackagesDELPHI10ZeosDbo.bdsgroup(16) Error: E2038 Illegal character in input file: '' (#$22)

c:ZEOSDBOpackagesDELPHI10ZeosDbo.bdsgroup(17) Error: E2038 Illegal character in input file: '' (#$22)

c:ZEOSDBOpackagesDELPHI10ZeosDbo.bdsgroup(18) Error: E2038 Illegal character in input file: '' (#$22)

c:ZEOSDBOpackagesDELPHI10ZeosDbo.bdsgroup(23)

c:ZEOSDBOpackagesDELPHI10ZeosDbo.bdsgroup(24) Error: E2029 '.' expected but end of file found

Remy Lebeau

361k21 gold badges287 silver badges488 bronze badges

PatowskiPatowski

1 Answer

Finally I had found no alternative but to install Delphi10 builder and compile using the linker option 'generate all C++ files', not without working around the $endif at zcomponent.dpk and after adding to the path the source folder where all the missing *.dcu were requested. After that C++ nor Delphi10 builders showed the toolbars but apparently the packages were installed correctly. Kind regards. Patowski